欧州委員会ガイダンス 2024年11月12日版 / 第11条 販売業者の義務の解説

§86 不適合の管理

§86 — Managing non-conformities

欧州委員会が公表する公式ガイダンス2024年11月12日版の参考訳です。ガイドは法的拘束力を持たず、疑義がある場合は英語版が基準となります。色付きの枠は指令本文の引用、それ以外が欧州委員会の解説です。

リスクをもたらす場合には、販売業者は、昇降機用安全部品を市場で提供した加盟国の権限ある国内当局に直ちにその旨を通知し、特に不適合及び講じた是正措置の詳細を示さなければならない。
a risk, distributors shall immediately inform the competent national authorities of the Member States in which they made the safety component for lifts available on the market to that effect, giving details, in particular, of the non-compliance and of any corrective measures taken.
手続規定を含め、昇降機指令2014/33/EUの規定を遵守しないことは、この指令に対する不適合とみなされる。自らが市場で提供した安全部品に不適合を発見した販売業者は、例えば製造業者若しくは輸入業者により、当該安全部品を適合させるために必要な是正措置が講じられることを確保しなければならず、又は販売業者自身が不適合な安全部品をリコール若しくは回収しなければならない。販売業者がまだ市場で提供していない安全部品については、§84も参照のこと。
Any failure to comply with the provisions of the Lifts Directive 2014/33/EU, including procedural provisions, is considered as non-conformity to this Directive. The distributor who discovers a non-conformity in the safety component that the distributor has made available on the market, must make sure that the necessary corrective actions to bring that safety component into conformity are taken, for example by the manufacturer or the importer, or the distributor has to recall or withdraw the non-conforming safety component. For safety components that the distributor has not yet made available on the market, see also § 84.
主な懸念は安全に関する不適合であり、これは一般に、安全部品が昇降機指令附属書Iに定める関連するEHSRに適合しない可能性がある、又は昇降機をそれらの要件に適合させることができない可能性がある状況をいう。
A major concern is with the safety related non-conformities, which generally refers to a situation where the safety component may not comply with the relevant EHSRs as defined in Annex I of the Lifts Directive or not enable the lift to comply with those requirements.
販売業者は、リスクを発見した場合には、安全部品が市場で提供された(サプライチェーンに入った)加盟国の権限ある国内当局に直ちに通知しなければならない。販売業者はまた、リスク、リスクの原因となる不適合、及び講じた又は講ずる是正措置の詳細を提供しなければならない。
The distributor, upon discovering a risk, must immediately inform the competent national authority in the Member State where the safety component is made available on the market (entering the supply chain). The distributor must also provide details of the risk, the non- conformity causing the risk and what corrective actions have been or will be taken.