Directive 2014/33/EU / 第IV章 — 適合性評価機関の通知

第32条 ノーティファイドボディの業務上の義務

Article 32 — Operational obligations of notified bodies

1. ノーティファイドボディは、第15条及び第16条に規定する適合性評価手続に従って適合性評価を実施しなければならない。
1. Notified bodies shall carry out conformity assessments in accordance with the conformity assessment procedures provided for in Articles 15 and 16.
2. 適合性評価は、経済事業者に不必要な負担を課さないよう、比例的な方法で実施しなければならない。ノーティファイドボディは、事業者の規模、事業者が活動する分野、その構造、当該昇降機又は昇降機用安全部品の技術の複雑さの程度及び生産工程の大量生産又は連続生産の性質を十分に考慮してその活動を遂行しなければならない。
2. Conformity assessments shall be carried out in a proportionate manner, avoiding unnecessary burdens for economic operators. Notified bodies shall perform their activities taking due account of the size of an undertaking, the sector in which it operates, its structure, the degree of complexity of lift or safety component for lifts technology in question and the mass or serial nature of the production process.
その際、ノーティファイドボディは、昇降機又は昇降機用安全部品のこの指令への適合に必要な厳格さの程度及び保護の水準を尊重しなければならない。
In so doing they shall nevertheless respect the degree of rigour and the level of protection required for the compliance of the lifts or the safety components for lifts with this Directive.
3. ノーティファイドボディは、設置者又は製造業者がこの指令の必須安全衛生要件又は対応する整合規格その他の技術仕様を満たしていないと認めるときは、当該設置者又は製造業者に対し適切な是正措置を講じるよう求めなければならず、証明書を発行してはならない。
3. Where a notified body finds that the essential health and safety requirements of this Directive or corresponding harmonised standards or other technical specifications have not been met by an installer or a manufacturer, it shall require the installer or the manufacturer to take appropriate corrective measures and shall not issue a certificate.
4. ノーティファイドボディは、証明書又は承認決定(該当するもの)の発行後の適合の監視の過程において、昇降機又は昇降機用安全部品がもはや適合していないと認めるときは、設置者又は製造業者に対し適切な是正措置を講じるよう求めなければならず、必要な場合には証明書又は承認決定を一時停止し、又は取り消さなければならない。
4. Where, in the course of the monitoring of conformity following the issue of a certificate or an approval decision, as appropriate, a notified body finds that a lift or a safety component for lifts no longer complies, it shall require the installer or the manufacturer to take appropriate corrective measures and shall suspend or withdraw the certificate or the approval decision if necessary.
5. 是正措置が講じられない場合又は必要な効果を有しない場合には、ノーティファイドボディは、証明書又は承認決定を、適宜、制限し、一時停止し、又は取り消さなければならない。
5. Where corrective measures are not taken or do not have the required effect, the notified body shall restrict, suspend or withdraw any certificates or approval decision(s), as appropriate.