Directive 2014/53/EU ／ 第III章 無線機器の適合性
第17条 適合性評価手続
Article 17 — Conformity assessment procedures
1. 製造業者は、第3条に定める必須要件を満たす観点から、無線機器の適合性評価を実施しなければならない。適合性評価は、すべての意図された動作条件を考慮しなければならず、第3条(1)(a)に定める必須要件については、合理的に予見可能な条件も考慮しなければならない。無線機器が異なる構成をとることができる場合には、適合性評価は、無線機器がすべての可能な構成において第3条に定める必須要件を満たすかどうかを確認しなければならない。
1. The manufacturer shall perform a conformity assessment of the radio equipment with a view to meeting the essential requirements set out in Article 3. The conformity assessment shall take into account all intended operating conditions and, for the essential requirement set out in point (a) of Article 3(1), the assessment shall also take into account the reasonably foreseeable conditions. Where the radio equipment is capable of taking different configurations, the conformity assessment shall confirm whether the radio equipment meets the essential requirements set out in Article 3 in all possible configurations.
2. 製造業者は、次のいずれかの適合性評価手続を用いて、第3条(1)に定める必須要件への無線機器の適合を証明しなければならない。
2. Manufacturers shall demonstrate compliance of radio equipment with the essential requirements set out in Article 3(1) using any of the following conformity assessment procedures:
(b)EU-type examination that is followed by the conformity to type based on internal production control set out in Annex III;
3. Where, in assessing the compliance of radio equipment with the essential requirements set out in Article 3(2) and (3), the manufacturer has applied harmonised standards the references of which have been published in the Official Journal of the European Union, he shall use any of the following procedures:
(b)附属書IIIに定める、EU型式審査及びその後の内部生産管理に基づく型式適合
(b)EU-type examination that is followed by the conformity to type based on internal production control set out in Annex III;
4. 第3条(2)及び(3)に定める必須要件への無線機器の適合を評価するに当たり、製造業者が欧州連合官報にその参照が公表された整合規格を適用せず、若しくは一部のみ適用した場合、又は当該整合規格が存在しない場合には、無線機器は、当該必須要件に関して次のいずれかの手続に付されなければならない。
4. Where, in assessing the compliance of radio equipment with the essential requirements set out in Article 3(2) and (3), the manufacturer has not applied or has applied only in part harmonised standards the references of which have been published in the Official Journal of the European Union, or where such harmonised standards do not exist, radio equipment shall be submitted with regard to those essential requirements to either of the following procedures: